Unidirectional Hall Effect DC Current Sensor CYHCT-L65K, Output: 4-20mA DC, Power Supply: +24V DC, Window: 150x40mm, Connector: Phoenix
- Article-Nr: CYHCT-L65K-U300A-54
- Serial-Nr: CYHCT-L65K
- Request on this Article
- Data Sheet Download
- Data Sheet Download (German)
The sensor CYHCT-L65K is based on open loop principle and designed with a high galvanic... more
Unidirectional Hall Effect DC Current Sensor CYHCT-L65K, Output: 4-20mA DC, Power Supply: +24V DC, Window: 150x40mm, Connector: Phoenix
The sensor CYHCT-L65K is based on open loop principle and designed with a high galvanic isolation between primary conductor and secondary circuit. It can be used for measurement of DC current, DC pulse currents etc. The output of the transducer reflects the real wave of the current carrying conductor.
Features and Advantages
- DC current measurement
- Output signal option (4-20mA, 0-5V, 0-10V….)
- High isolation between primary and secondary circuits
- Split Core, easy installation
- Protection against overvoltage
- Protection against reversed polarity
- Output protection against electrical disturbances
Applications
- Photovoltaic equipment
- Battery banks, such as, monitoring load current and charge current, verifying operation
- Transportation, measuring traction power or auxiliary loads
- Phase fired controlled heaters
- Directly connect to PLC
- Sense motor stalls and short circuits
- Industrial instrumentation
Nominal Input Current: | 0-300A, 0-400A, 0-500A, 0-600A, 0-700A, 0-800A, 0-1000A, 0-2000A, 0-3000A, 0-4000A, 0-5000A, 0-6000A |
Sensor Type: | Open-Loop |
Power Supply: | +24 V DC |
Output Signal: | 4-20 mA DC |
Current Type: | DC |
Window Type: | Rectangle |
Window Size (mm): | 150 x 40 |
Direction: | unidirectional |
Accuracy: | 0,5%, 1% |
Linearity: | ±0,5%, ±0.2% |
Operating Temperature: | -40°C ~ +85°C |
Frequency Bandwith: | DC – 8kHz |
Data sheets to download:
Viewed